Now live: a hybrid process digital twin for amine gas sweetening — it names the fault and the root cause, not just the alarm. Request a demo →

QEMOPS logo

Dynamic Simulate

Try the move before the plant does.

Dynamic Simulate runs the full-plant Aspen Plus Dynamics model. Change one or more controller set-points at chosen times, and see how the absorber, the regenerator and the sweet gas respond over the next hours, before anyone touches the real plant.

22Controller set-points you can move
8 hLongest run
31Plant responses recorded
0Changes made to the real plant

MVPEvery figure above is counted in the minimum viable product: the amine train modelled for gas sweetening and post-combustion carbon capture.

What it does

Four things it does that a dashboard does not.

01

Dynamics, not a steady state

The model follows the plant minute by minute, so it shows how a change travels through the train and how long the plant takes to settle, not only where it ends up.

02

Changes at the times you choose

Several set-point changes can be planned in one run, each at its own minute, the way a real move is carried out on shift.

03

Settled before your changes

The model is run to a steady start before the first change, so start-up drift is not mistaken for the effect of the move.

04

Safe bands on every input

Each set-point can only be moved within a safe band, so a scenario cannot ask the model for a plant that could never run.

How it works

The pipeline, end to end.

  1. 1

    Plan the move

    Pick the set-points to change, the new values and the minute each change happens.

  2. 2

    Set the run

    Run length up to 480 minutes, with results recorded every 1 to 30 minutes.

  3. 3

    Run the model

    The full-plant model runs on a dedicated simulation PC.

  4. 4

    Read the response

    Column temperatures, sweet gas quality, drum levels and pressures, charted over time and ready to download.

Where it applies

Built for amine systems today. Not limited to them by design.

The platform is focused on acid gas removal — gas sweetening and post-combustion carbon capture — because that is where the model is calibrated and where the fault library is real. The method underneath is not amine-specific: a physics reference model, residuals against expected-healthy, fuzzy diagnosis over graded indicators, and costed consequences. Extending it to another unit means new datasheets and a new calibration, not a new platform.

  • Gas sweeteningLive today
  • Post-combustion carbon captureLive today
  • Other acid gas removalMethod applies
  • Wider process unitsFuture

The fastest way to judge this is to open it.

The platform runs on a real amine train with thirteen days of one-minute history behind it. Nothing on these pages is a mock-up.

Open the platform